Launch ark reset active total conversion что это

Обновлено: 25.01.2025

These are the most powerful form of new content, and they are listed in the "Total Conversions" section of the main menu, because each Total Conversion is effectively a new game. When you cook a Total Conversion, you need to create an empty sub directory in the Mods folder for the Total Conversion to cook properly. You are allowed to alter ANY OF THE ASSETS YOU WANT, DIRECTLY! Literally, anything you can edit, you are welcome to edit. That includes PrimalGlobals, PrimalGameData, all of the artwork and blueprints directly, even replacing our main menus, startup Movie images and Ogg music files. You basically get to recook ARK the game and add or change anything. You can Cook as many Maps as you'd like with it as well, or just modify TheIsland and recook that (in which case, be sure to specify TheIsland). Total Conversion use a "diffing" check against the shipped game media to only package up assets that you have altered from our originals, this keeps the upload/download size REASONABLY small . Total Conversions also use separate matchmaking per Total Conversion, so you can't see any non-TC multiplayer sessions when you're within a TC (currently the core game will list TC sessions, and ask the user to autodownload the TC and relaunch if they try to join it).

Note: When cooking a TC, you should at least specify TheIsland as a Map to Cook, because various assets are only referenced within that map (Dinos, etc.). Even if you haven't made any changes to TheIsland itself, this will ensure that all assets get "checked" for recooking in the TC. That should do it for you

Long Load Time / Fatal Errors on load

Anytime you experience either Exceptional long loading times or Fatal errors on loading. EXIT STEAM , and then re-enter the game lobby and try again. If it repeatedly loads slowly or errors, try doing a Re-Verify of your game files.

Updating the dev kit & keeping track of new content [ ]

Before updating the dev kit, you should backup your TC content. A Dev kit update will almost never break the content of your mod. If you want to update your content with the latest update, you should run a diff. (with win-merge for example), that is the best way to update your TC with the vanilla game content at the moment.

Verify Your GAME through Steam

Your Steam page.
Right click the Game Title.
In the box that opens: Click on the tabs on the top (Local Files).
In the last box in the list: Verify integrity of Game Files… : Click this.
Wait for the process to complete. (May be lengthy).
When the process finishes, restart the Game Title to re-acquire any lost files.
After files are re-acquired.
Restart Steam from one of the methods above, and try the Game Title again.

There are no servers in browser:

If you cannot see any servers listed in the browser, make sure that the Map, Game Mode, & Sort By lists are set to All .
The Session Filter should be set to Unofficial if this is a new toon,
Or if you are a past player use My Survivors .
If the settings are correct, but you still can’t see any Ark Survival servers, then you may still use the Steam Server List Tool:

Open the main Steam client
Click View > Servers
Select your desired tab
Use the Internet tab for a list of official and unofficial ARK servers
Use the Favorites tab to manually add servers using the server's query port
Use the History tab to find and manage the list of servers you have connected to before

Click "Change Filters" and change the Game to "ARK: Survival Evolved" (each tab has its own filter)

[Sticky] ARK Survival Evolved OPTIMIZATIONS and BUG FIXES

AMD SETTINGS:

Below is the Global profile which will provide the best performance/quality ratio across most titles. Yet, there may be times that you will still be searching for even greater performance (i.e higher frames). When this situation presents itself, there is a primary setting that should always be tested first to see if performance is increased when adjusted via Radeon settings. Everything else would remain the same. Tessellation Mode: Override Application Settings/ None To access these options, open AMD Radeon Settings by right clicking on your desktop, and select AMD Radeon Settings.

Anti-aliasing Mode: -Use application settings (Off in game)
Anti-aliasing Method: -Multisampling (Off in game)
Morphological Filtering: -Off
Anisotropic Filtering Mode: -Use application settings (Off in game)
Texture Filtering Quality: -Performance
Surface Format Optimization: -On
Wait for Vertical Refresh: -Off, unless application specifies (Off in game, unless your frames are able to be maintained, never dropping below your monitors refresh rate)
OpenGL Triple Buffering -Off
Shader Cache: -AMD optimized
Tessellation Mode: -AMD optimized

Frame Rate Target Control: -On [Set to your monitors maximum refresh rate - EX: 60 is using 60Hz, 75 is using 75Hz etc..]

ARK Survivor: Game Opt. & Fixes

Post of helpful Optimizations and Client side bug fixes for our ARK Players:

GAME OPTIMIZATIONS

ARK SURVIVAL OPTIONS PANEL CONFIGURATIONS:

We’ll walk you through every option as many of them can impact FPS or boost/lower overall game performance: Please note that these options will not be the most optimal setup for all computers, but about 80% of them will see a huge increase in FPS from changing these settings. Open the Options Screen from your ARK Lobby Screen. After altering all of these settings, remember to save them!

Resolution – change this depending on your device and CPU/GPU, desktop computers should not have any problems running 1920×1080 but on a Laptop it’s recommended to use the 1280×768 resolution.
Window Mode – ALWAYS have this in full screen, Windowed or WindowedFullscreen will decrease your FPS and cause lag and/or frame tearing. Note full window is NOT compatible with alt tabbing.
Resolution Scale – lowering it down will decrease resolution but increase FPS, only lower this as a last resort if you have lag even with other settings optimized.
World Tile Buffers, View Distance, Anti-Aliasing and Post Processing – set these to medium or low depending on your computer.
General Shadows, Terrain Shadows, Ambient Lightning – configuring these to the lowest setting will provide you with a nice increase to FPS and overall performance.
Sky Quality, Ground Clutter Density, Ground Clutter Distance and Mesh Level of Detail – set these between lowest-middle, these will most certainly lower your overall FPS if you have them on max.
High-Quality Anisotropic Filtering – ON This feature creates smoother looking objects from various points of view.
Motion Blur – OFF An unimportant aesthetic.
Film Grain – OFF Another unimportant feature.
Distance Field Ambient Occlusion – OFF Triggers soft shadows for distant objects.
Screen Space Ambient Occlusion (SSAO) – OFF Triggers soft shadows for nearby objects.
Dynamic Tessellation – OFF
Distance Field Shadowing – OFF Another shadows-related feature.
High-Quality Materials – OFF This option improves textures of in-game materials.
Sub Surface Scattering – ON It affects light behavior and makes foliage more realistic.
High-Quality VFX – OFF It affects all in-game water effects.
Simple Distance Character Movement – ON It relieves CPU from animations of distant characters.
High-Quality LODs – ON Improves the level of details.
Extra Level Streaming Distance – OFF This will make map loading faster while moving fast.
Color Grading – ON Slightly improves colors. It won’t affect FPS.
Light Bloom – Personal Choice. Won’t affect performance. Can cause blinding bright spots.
Light Shafts – Personal Choice. It doesn’t affect performance. Can cause bright Shafts of light.
Mesh Level of Detail (LOD) – Again. you can choose to disable/enable it by your own preferences. It affects GPU VRAM marginally.

Restarting Steam

Restarting Steam can often help resolve problems with Internet connectivity when trying to load or play games. You can restart Steam by closing and reopening the client, or refresh your Steam files in the event you feel that Steam's files may be modified, corrupted, missing, or mis-configured on your operating system. If none of these solutions work, try contacting Steam.

Method 1 Restarting Steam

Click on “Steam” in the toolbar at the top left corner of your Steam session.
2. Select “Exit” or “Exit Steam.” Your current session of Steam will close. Alternately, right-click on the Steam icon in the notification tray on your desktop, and select “Exit.” In Windows, the notification tray is located at the bottom right corner of the desktop; in Mac OS X, the notification tray is located at the top right corner of the desktop.
3. Double-click on the Steam icon on your desktop to relaunch Steam. If the Steam shortcut icon is not located on your desktop, search for Steam in the “Start” menu in Windows, or in the Applications folder on Mac OS X.

Method 2 Refreshing Steam Files in Windows

Method 3 Refreshing Steam Files on Mac OS X

Method 4 Refreshing Steam Files in Linux

Launch Terminal and type “steam --reset” at the prompt.
2. Press “Enter.” The message “Installing bootstrap /home/[username]/.steam/steam/bootstrap.tar.xz” will display on-screen. This message means your Steam files have been successfully refreshed.
3. Restart your computer, then relaunch the Steam client. Your Steam files will now be refreshed, and you can resume game-play as normal.

GAME ERRORS and FIXES

MINIMUM SYSTEM REQUIREMENTS:

Windows:

OS: Windows 7/8.1/10 (64-bit versions)
Processor: Intel Core i5-2400/AMD FX-8320 or better
Memory: 8 GB RAM
Graphics: NVIDIA GTX 670 2GB/AMD Radeon HD 7870 2GB or better
DirectX: Version 10
Storage: 60 GB available space

Mac OS X:

OS: OSX 10.9 or Higher
Processor: 2 GHz Equivalent CPU
Memory: 4000 MB RAM
Graphics: OpenGL 3 Compatible GPU with 1GB Video RAM
Storage: 20000 MB available space

Linux

OS: Ubuntu Equivalent Distro
Processor: 2 GHz 64-bit CPU
Memory: 4000 MB RAM
Graphics: OpenGL 3 Compatible GPU with 1GB Video RAM
Storage: 20000 MB available space

Launch Options:

Right click ARK: Survival Evolved in your Steam Library
Open Properties
In the General tab, click Set Launch Options
Paste in:
-USEALLAVAILABLECORES -sm4 -d3d10 -nomansky -lowmemory
Click OK
Close the other window and try ARK again normally (do not launch in a special mode)
Reset Resolution
Launch the game with the option "Reset Resolution"
Otherwise, open GameUserSettings.ini located in steamapps\common\ARK\ShooterGame\Saved\Config\WindowsNoEditor (or the equivalent for your OS)

Adjust the following settings (more details here) to your choosing:
[/script/shootergame.shootergameusersettings]
ResolutionSizeX=1920
ResolutionSizeY=1080
bUseDesktopResolutionForFullscreen=False
FullscreenMode=1
bUseVSync=False

List of the all useful launch options with descriptions: -USEALLAVAILABLECORES - (the game will use all your CPU cores) -sm4 and -d3d10 - (runs game with DirectX 10) -nomansky (removes clouds and some sky effects) -lowmemory (the game will use only 4gb of your RAM) -w 640 -h 480 - (runs game in 640x480 resolution) -full - (fullscreen mode) -window - (windowed mode with borders) -noborder - (windowed mode without borders) -low - (runs ARK as a low-priority process) -high - (runs ARK as a high-priority process) -noaafonts - (removes fonts anitalising) -autoconfig - (return default settings) -novid (turns off some cinematics)

General Troubleshooting

Ensure your system meets the Minimum System Requirements mentioned above.
Ensure you have an audio output device connected.
Restart your computer and try ARK again.
(Windows) Complete steps below for Redistributable Issues
- (Windows) and Redistributable issues:
- Ensure you have a 64-bit operating system
- Run windows update and download all critical updates
- Download and install Visual C++ 2013
- Download and install DirectX web installer
- Restart your computer and try ARK again
- (Instructions)
NVIDIA SETTINGS:

In your taskbar, find the NVIDIA GeForce Experience icon. Right click and then left click NVIDIA Control Panel. On the Left side of the window that opens find 3D Settings .

Adjust image settings with preview: In the window that opens, Change these Settings: Set Use my Preference Emphasizing: PERFORMANCE Click Apply. Click Use the advanced 3D image Settings: Click Apply.

Configure Surround, PhysX:
In the window that opens, Change these Settings:
PhysX settings:
Processor:
Choose your Graphics Card from the drop down list.
Click Apply.

On the Left side of the window that opens find Display.

Change Resolution:
Go to your monitor and select it. (If you are on dual or triple Select the Main screen(s) you game on.
Be sure to duplicate the settings that you can on the other gaming screens.)
Select the highest NATIVE PC Resolution rate for your monitor.
Then select the Highest Refresh rate for that setting.
Click Apply and then YES.
Repeat this for each of your monitors if you are running if more than one.

Adjust desktop color settings:
1. Select your monitor.
2. Choose - Use NVIDIA settings.
3. Apply the following enhancements: Digital Vibrance: 80% (Or personal preference)

Adjust desktop size and position:
If you previously setup in the 3D settings:
These settings will be greyed out. Leave these settings Greyed for the best results.
If you want to use one of these options instead, Go back into 3D settings and Turn OFF GPU Scaling to re-enable these settings.
Tips:
BEST FPS(using native resolution): NO Scaling.
BEST FPS and VISUALS: GPU Scaling(IN 3D settings)
Play lower res/pixel games: Set Integer Scaling
Set your Resolution to Native Your Hertz to what your monitor uses
Click apply.

On the Left side of the window that opens find Video:

Adjust video color settings:
Select your monitor.
Under How do you make color adjustments?
Select With the NVIDIA settings.
Click Advanced and set the drop down to: Full (0-255)
Click apply

To ensure all settings are properly applied, Please restart your PC now!

Launch ark reset active total conversion что это

I wonder if its legit,it would help my situation if it really works like that
5 июл. 2018 в 0:51
I think it would work, but:
- Running in directx 10 mode, removes all planting, some effects in the game.
- lowmemory mode, when I tried it before, my view distance was lowered thus I could not see far.

Most interesting is what changes are in those files they say to overwrite, that could be interesting.
Could be optimilisations. Have to look in to that.

You can try running ark in dx10 mode lowmemory, just by selecting that option to launch in steam and see what it already does for you and if you are okay with the graphics.
You will get a better fps just by doing that.
Recommended I think for pc's with less then 8GB RAM.

I think it would work, but:
- Running in directx 10 mode, removes all planting, some effects in the game.
- lowmemory mode, when I tried it before, my view distance was lowered thus I could not see far.

Most interesting is what changes are in those files they say to overwrite, that could be interesting.
Could be optimilisations. Have to look in to that.

You can try running ark in dx10 mode lowmemory, just by selecting that option to launch in steam and see what it already does for you and if you are okay with the graphics.
You will get a better fps just by doing that.
Recommended I think for pc's with less then 8GB RAM.
i mean its still a risk because there was a lot of people saying that it doesnt work or it just boosted them 5 fps higher
i think the guy that made the video has GTX 770m or so,im not sure
How about deleting - lowmemory from there ? 5 июл. 2018 в 1:02
Launch ARK (Low Memory 4GB)
This is recommended if you have less than 8 GB RAM. You will miss the advanced options (those with the checkboxes) but the game runs better. Same result as the command –lowmemory.

Launch ARK (Extremely Low Memory) and Launch ARK (Extremely Low Memory, No Sound)
With only 4GB of RAM this is your way to go. This preset utilize the –sm4 command and forces the use of dx10 shader model 4. Also all advanced options are overruled and disabled.

Launch ARK (“No Sky Effects”)
The game starts without the sky effects (no clouds and fewer stars). Same as the command -nomansky

Launch ARK (Reset Active Total Conversion)
Starts the Game without Total Conversion mods

!The use of those presets will nullify alll used commands (like -sm4)!
Tweaks
I guess you have encountered the phrase “use -USEALLAVAILABLECORES -sm4 -d3d10 -nomansky –lowmemory and you have no fps problems anymore”.

But what are they doing?

And why scream those people, who are using them, about bad “epic” graphic?

Most people don´t know what those commands do to the game so I will try to explain those commands here.

You can see here a picture without tweaks and a picture with the options as a baseline for comparison with the following tweaks. All pictures below have unchanged options and only the respective tweak was used.

Launch ARK (Low Memory 4GB)
This is recommended if you have less than 8 GB RAM. You will miss the advanced options (those with the checkboxes) but the game runs better. Same result as the command –lowmemory.

Launch ARK (Extremely Low Memory) and Launch ARK (Extremely Low Memory, No Sound)
With only 4GB of RAM this is your way to go. This preset utilize the –sm4 command and forces the use of dx10 shader model 4. Also all advanced options are overruled and disabled.

Launch ARK (“No Sky Effects”)
The game starts without the sky effects (no clouds and fewer stars). Same as the command -nomansky

Launch ARK (Reset Active Total Conversion)
Starts the Game without Total Conversion mods

!The use of those presets will nullify alll used commands (like -sm4)!
Tweaks
I guess you have encountered the phrase “use -USEALLAVAILABLECORES -sm4 -d3d10 -nomansky –lowmemory and you have no fps problems anymore”.

But what are they doing?

And why scream those people, who are using them, about bad “epic” graphic?

Most people don´t know what those commands do to the game so I will try to explain those commands here.

You can see here a picture without tweaks and a picture with the options as a baseline for comparison with the following tweaks. All pictures below have unchanged options and only the respective tweak was used.
still,i dont know if i should try anything ..i just have GTX 965m.. 5 июл. 2018 в 1:28
Launch ARK (Low Memory 4GB)
This is recommended if you have less than 8 GB RAM. You will miss the advanced options (those with the checkboxes) but the game runs better. Same result as the command –lowmemory.

Launch ARK (Extremely Low Memory) and Launch ARK (Extremely Low Memory, No Sound)
With only 4GB of RAM this is your way to go. This preset utilize the –sm4 command and forces the use of dx10 shader model 4. Also all advanced options are overruled and disabled.

Launch ARK (“No Sky Effects”)
The game starts without the sky effects (no clouds and fewer stars). Same as the command -nomansky

Launch ARK (Reset Active Total Conversion)
Starts the Game without Total Conversion mods

!The use of those presets will nullify alll used commands (like -sm4)!
Tweaks
I guess you have encountered the phrase “use -USEALLAVAILABLECORES -sm4 -d3d10 -nomansky –lowmemory and you have no fps problems anymore”.

But what are they doing?

And why scream those people, who are using them, about bad “epic” graphic?

Most people don´t know what those commands do to the game so I will try to explain those commands here.

You can see here a picture without tweaks and a picture with the options as a baseline for comparison with the following tweaks. All pictures below have unchanged options and only the respective tweak was used.

How to reduce the size of ARK Survival and save some DISK SPACE.

Go to the ark directory, find "content" and "seekfreecontent", and enable NTFS file compression from the "properties" menu. It can take an hour or two to complete depending on your CPU speed. Most games come pre-compressed. ARK does not, because the devs are inept.

Unsubscribe from all your mods,
(while doing this "favorite" any of the mods you do want to keep or you are interested in, so you do not lose them.)
delete all workshop folders in this location:
ARK>ShooterGame>Content>Mods
Then resubscribe to the mods that you actually use now, and then exit steam and restart it(instructions above) .
This should trigger the steam download to start.

Maps & Mods in TC [ ]

Any maps that you cook with your Total Conversion will be listed in the Maps list when you are playing your Total Conversion. Total Conversions, of course, can not Stack with each other, and while you can technically use Mods with Total Conversions, it can be dangerous if not explicitly designed to work together -- however it will most likely be fine as long as you don't rename your Total Conversion's PrimalGameData (since so all mods inherit from PrimalGameData assuming that original asset name). New Mods and Maps can also be explicitly designed to work with a Total Conversion if you were to upload your Total Conversion source assets somewhere, which you're welcome to do (such as what we've done with SotF). Think of a Total Conversion as a complete alternate set of media & assets for the game, because that's basically what it is! We recommend that Total Conversion creators name their content with "Total Conversion:" at the beginning of its name on Steam Workshop, as that will display best within the in-game Total Conversion list and make it clear to users where they will find this new content listed within the game. Total Conversions have the downside of requiring an application restart to switch them, but they provide the most power to remake the game as you see fit.

Note: There is a new button called "Reset GUID" near the upload section. This resets the "network version" on your Content, forcing players to update if they want to reconnect to a server. Use this if your Content has changed dramatically that might affect network gameplay (i.e. new objects, networking logic, or architectural changes) and you want to enforce a version mismatch multiplayer disconnection with older Content. If you do want to change the GUID, then you actually need to click that button BEFORE you COOK (or cook again after you change it . We'll move that button soon to the "Cook" section of the menu to make that clearer.

Launch ark reset active total conversion что это

This guide will help you with the question “can I run it?” and explains the Game Options, Advanced Options and the available tweaks for the game.

23,725 уникальных посетителей

394 добавили в избранное

If you follow the forums you can always find the question “can I run it?”. The answers are sometimes correct and sometimes wrong or simply misleading due to missing knowledge about the game options. Some people also like to boast with impossible high settings with an old and weak GPU (without stating their used tweaks). So with this guide I want to shed some light at the requirements, game options and the available tweaks.

In it´s current, unoptimized, state ARK needs a lot of power for the higher graphics and resolutions. Nonetheless a lot of old and weak GPU´s can handle ARK with medium or low graphics.

With the minimum requirements you can play ARK with low graphics and low resolution with something around 20 fps.
With the Recommended you can play with medium settings at 30FPS+.

Even after release, every patch will alter the performance, requirements and stability of the game!
Sometimes it get better, sometimes worse. Strong systems have no problems with this and could easily compensate for this.
But if you have a weak system, which operats already at its limit, a single patch could make the game unplayable for you. This is mostly shown with the freeze during the loading screen at "WorldsEnd" or an other file.
Furthermore the error with "LowLevel" and "Assertion faild" suggests a overburdend system or a faulty file (in this case verify the gamedata with Steam).

Which OS you are using is not important, except for the use of dx12, then you need Win10. The important thing with the OS is that you need a 64bit-OS, since ARK needs more system resources than a 32bit-OS can provide.

The CPU is important for moving data around and has primary an impact on the loading times. In its current state of ARK the speed (GHz) of the CPU is a little more important than the number of cores. So a modern 4,0GHz Dual(2)-Core CPU is a little better than a modern 3,0GHz Quad(4)-Core CPU. The CPU can have an (bad) effect on the FPS if it throttles the GPU down.
Currently ARK gains nothing from "logical cores" (hyperthreading) and more than 4 cores. So a I5 with its 4 cores is the current maximum ARK could utilize.

The RAM is a fast buffer (memory) which holds the stuff that’s needed in the next moment. Since ARK is an open world game where you can go where you want at any moment, the game needs to hold a lot of stuff in the RAM. If the RAM is too small, some of this stuff will be pushed back to your HDD/SSD and it takes noticeable more time to load it from there.
Windows takes usually 4GB RAM and ARK takes 12GB RAM with high settings (on epic a little more). So if you have only 8GB RAM, you may need to run ARK in the "low Memory (4GB)" mode since from the 8GB 4 are already used by windows.
The speed of the RAM is also important. The difference between 2133-RAM and 3200-RAM could easily be 15FPS and up.

The VRAM is a very fast memory and is part of the graphic card. All graphic options need an amount of VRAM and this amount scales with the resolution. If the chosen graphic settings need more VRAM than the graphic card has, the game gets choppy. What happens exactly depends on the game but the performance suffers (fps goes down), objects pop up and textures get muddy before they appear in Hi-Res.
For ARK are 6gb VRAM needed. With less VRAM you will face FPS drops due to loading lags.

The GPU is the part of your pc which handles the graphics. Since ARK is a next-gen-game utilizing a modern graphic engine (Unreal Engine 4, which itself is still in development) it burdened the GPU extreme. More about the GPU a little later.

The game runs currently in dx11 but the dx12 support will come as soon the devs and AMD/NVIDIA have fixed the problems. The game can also run in dx10 for better performance but the graphic suffers greatly.

60GB big (only the base game). The size can change with every patch. Also mods need space too and big mods, like a map, take up to 8GB of space.
With all DLC-maps and some mods, the will need over 100gb.

You can find information about your system with steam: steam > help > system information. The exact graphic card can be found with the deviceID and Google. The ID here in this picture (0x7300) is the R9 Nano with 4GB VRAM.

The loading times depends on the CPU (GHz & Cores) the available RAM and the speed of your HDD/SSD. So with a slow CPU, few RAM and a slow HDD you can wait a looooooong time (5min and up) for ARK to load.
ARK: Survival Evolved Revisited – Benchmark and Graphic comparison (German)
- Comparison of the preset graphics (video, pictures with slider, picture with detail view in all 4 presets)
- Benchmark with the preset graphics epic, high and medium at 1080p without adjusted options and tweaks
I will keep the old one here too, as comparsion.

DX 12 changes many things and I will try to keep it simple here.
One of the biggest change concerns the CPU. With DX12 all cores can be used which will lead to a high improvement in loading times and some FPS in some certain cases.
For example:
If you have a slow CPU like a A10, FX, I3 or low/medium I5 and a fast GPU like a 390X, Fury(X), 980(Ti), Titan X you will gain some FPS. This has nothing to do with the GPU-features from DX12! It is simply a better coordination between CPU and GPU.

Also the integrated GPU of a CPU can now be used as a slave for the dedicated GPU (graphic card). This will improve the fps but the CPU needs more power (+10-25W) and generates more heat (+10-30W).

There are also many changes regarding the GPU. Most basic features are supported by all GCN-cards from AMD (HD5xxx, 6xxx, 7xxx, R7 Series, R9 Series) and most Nvidia cards (GTX 4xx, 5xx, 6xx, 7xx, 9xx).
But only the modern cards support DX12 (almost) fully. Those are the R7 and R9 Series from AMD and the GTX 900 Series from Nvidia.

AMD cards could gain FPS from Asynchronous Compute while Nvidia cards can´t currently use it due to hardware/software problems.
On the other side, Nvidia cards will lose less FPS with the use of some graphical techniques due to Conservative Rasterization and Raster Order Views.

The gain from DX12 for a old system will be scant.
Modern systems will get a good boost regarding loading times and fps due to multi-core usage and asynchronous compute (R7/R9 series, GTX 900 series). But I don´t think we will see a 20% increase in alpha stage due to the missing optimization.

08.03.2016
Asynchronous compute is still disabled for NVIDIA-Cards.
This means that NVIDIA cards gains almost nothing from DX12 and could even lose some performance while using DX12.
Furthermore some features from NVIDIA´s "GameWorks" seems to cause graphic bugs if used with asynchronous computing (like HBAO+).
Still no statement from NVIDIA regarding the DX12 desaster.

19.05.2016
The first GTX 1080 cards are in the hands of hardware magazines and were scrutinized. The card itself is quite good (5-10% above a 980 TI).
Regarding DX12 it comes as feard. Since the Pascal chip is only a smaller and slightly modified Maxwell chip, it has the same problem with DX12. The GTX 1080 loses performance with DX12 and gains also nothing from asynchronous compute (it loses a little performance).

10.09.2017
Nothing new here^^

There are 2 kinds of GPU´s out there.

First the integrated GPU´s which are a part of a CPU.
The integrated GPU is very slow due to its limitation in power draw and heat generation (since she must share this with the CPU). ARK could be played with a modern integrated GPU (like Iris Pro Graphics 6000) but only with tweaks, low graphics and with a very low resolution.

Second the dedicated GPU´s or Graphic Cards.
Those things are the most vital part (beside the CPU) of your gaming pc. There are hundreds of Graphic Cards out there with multiple variants. It is not easy to compare all those cards and some people call everything below 60 fps “unplayable” and some people are fine with 20 fps.

There was a lot movement in the GPU market over the last year and quite some optimizations for ARK.
Please remember: Since it is a sandbox game, you can always build so much that even a GTX 1080Ti will go down on its knees.

I will give here a rough overview for some GPU´s in 1080p 100% res scale (the resolution which over 90% of the people still use).

For full epic settings you will need a GPU like a GTX 1070/980Ti or Vega56/Fury.
For high settings you will need a GTX 1060/980 or RX 580/R9 390.
For medium settings you will need a GTX 1050TI/960 or RX 470/R9 380.
For low settings you will need a GTX 1050/950 or RX 460/R9 270X.

Depending on how much FPS you want/need this will change a little.

You can also take a look here at a benchmark:

These are the results from the 3DMark11 benchmark. Your card should fetch at least 4500 points here for a smooth gameplay at low graphics and low resolution.
If you go with the Fire Strike 1.1 benchmark aim for at least 3000 points.

Like I said before this is only a recommendation and can change with a driver-update or an update for ARK.

Here you can change the resolution.
The resolution has the biggest impact on FPS and you need a fast GPU for 1080p.

Here you can chose different window modes like “Windowed”, “Fullscreen” and “Windowed Fullscreen”.
The use of "Windowed" and "Windowed Fullscreen" will lower the FPS and can cause FPS drops and freezing.

Here you can chose the graphic presets.

With this slider you can change the resolution scale (right side is maximum). With 100% the game is rendered and displayed in the same resolution. If you chose a lower scale you can gain FPS but the quality will suffer. With a lower scale the game is rendered in a lower resolution but it is displayed in your chosen resolution. This results in a blurry, blocky “Minecraft”-look for the game. Here 3 pics for comparison with 100%, 75% and 50%.

This option establishes the amount of graphic memory used to render areas (tiles) of the map that you aren´t in. In other words this option says how much stuff (textures, models,…..) the game can store in buffer (memory) for quicker loading while traveling around. This needs a lot of VRAM and RAM but reduces fps drops and lags while traveling with fast mounts. This option is one of the more demanding ones and can cost you a lot. Start with medium here and adjust it. You may need a restart for the full effect.

Here you can chose the distance in which the game loads areas (tiles) of the map. Areas that are not loaded in are easily spotted from mountains due to their emptiness. This can cost a huge amount of performance.

This option smoothes the edges of objects at some performance cost.

This option controls visual quality such as bloom, depth blurring, portal distortion, character lines, light rays, and so on. It takes some performance but the results are pretty good.

This adjust quality, intensity and abundance of most shadows.

This adjust quality, intensity and abundance of terrain specific shadows. As in every other game shadows need a lot of performance and it is recommended to use low or medium settings.

This option controls the texture quality. On cards with more than 2 GB of VRAM you can use high/epic usually without problems.

This slider controls the amount and quality of the clouds. This costs only minor performance. (can be overruled and disabled with –nomansky)

This slider controls the amount of stuff on the ground and the amount of grass and flowers. This cost some performance but fields and the beach don´t look so empy.

The advanced options together take a huge amount of performance but the game looks great with them (just like the devs pics). Those options will be overruled and disabled with –sm4, –d3d10, –lowmemory and all the preset “Launch ARK (….)” so the game comes nowhere near “epic” with those tweaks.

This filtering method is enhancing the quality of textures from certain angles. Basically, it makes things look a little smoother sometimes and costs almost no performance.
It is up to you to use it. Some people don´t like this effect.

Controls the streaking of rapidly moving objects. It´s up to your taste but recommendation is “off”.

Activates grain filter (like film artifacts in a bad movie). It´s up to your taste but recommendation is “off”.

This activates soft shadows for distant objects (like SSAO). Looks good but eats a lot of performance.

This activates soft shadows for near objects. Like shadows this option needs a lot of performance.

This Option allows the breakdown of polygons to create finer, higher quality graphics. This is currently always disabled and can´t be activated. Maybe it´s broken, only the devs know why.

This activates the shadows for distant objects so the shadows don´t look like cut off after a few meters but it cost a lot of performance.

This enables the high quality textures for terrain material.

This enables the option for light to interact with the surface of an object and to be scattered by it (like a sunbeam in foliage). This takes some performance but makes forests very atmospheric.

Better visual effects for rain and underwater.

Reduces the animations for far away characters and dinos. It reduces the CPU usage a little.

Improves the LoD a little.
Almost no impact on performance.

Increases the number of map tiles which are loaded into the RAM. This results in a smoother movement especially with ffast mounts.
This option increase the RAM usage!

This option alters the colors visible in the game.

Toggles Light Bloom.

Toggles Light Shafts.

With this slider you can controls the complexity of your surroundings like more foliage, more rounded stones and so on. This also controls the range for the diminishing of the LOD in the distance.

This is recommended if you have less than 8 GB RAM. You will miss the advanced options (those with the checkboxes) but the game runs better. Same result as the command –lowmemory.
Launch ARK (Extremely Low Memory) and Launch ARK (Extremely Low Memory, No Sound)
With only 4GB of RAM this is your way to go. This preset utilize the –sm4 command and forces the use of dx10 shader model 4. Also all advanced options are overruled and disabled.

The game starts without the sky effects (no clouds and fewer stars). Same as the command -nomansky

Starts the Game without Total Conversion mods

!The use of those presets will nullify alll used commands (like -sm4)!

I guess you have encountered the phrase “use -USEALLAVAILABLECORES -sm4 -d3d10 -nomansky –lowmemory and you have no fps problems anymore”.

But what are they doing?

And why scream those people, who are using them, about bad “epic” graphic?

Most people don´t know what those commands do to the game so I will try to explain those commands here.

If you want to use those tweaks don´t use the preset Launch Options!
Looks like the use of the commands -sm4 and -d3d10 can cause the "GPU driver crash/reset" bug. So if you encounter this bug, give it a try and remove those commands.
no function anymore

With this command ARK gains priority access to RAM and CPU. This could help with lags, freezes and crashes on old and slow systems.

This command disables all sky-effects and reduce the number of stars visible at night. This will gain you some fps without sacrificing much. The preset “Launch ARK (“No Sky Effects”)” utilize this command.

With this command ARK will only use shader model 4 (DX10) instead of shader model 5 (DX11). Also all advanced options and the shadows are disabled and cannot be activated in game (even if the box is checked they are disabled). Light sources are dimmer compared with DX11 so it will be darker at night. Sometimes the bloom effect can be blinding with this command. The preset “Launch ARK (Extremely Low Memory)” utilize this command. This gains you something like 15-20 fps but the graphic goes down quite a bit as you can see in the pic.

With this command ARK runs completely in DX10. This command includes the –sm4 command and all his changes and downsides. Since the game runs now in dx10 you can gain up to 30 fps but the game looks not so good anymore. In some extremely rare cases (GPU/driver combinations) this command can backfire and will reduce fps greatly.

This command reduces the used RAM to ca. 4GB, disables the advanced options, shadows and is utilized in the preset “Launch ARK (Low Memory 4GB)”. You can gain something like 10fps with this.

Читайте также:

23,725	уникальных посетителей
394	добавили в избранное