Rog strix z490 h gaming не ставится сетевой драйвер

Обновлено: 21.01.2025

I recently got a problem with my old bundle (Z390 Strix F + 9700k) and the store gave me the credit for this parts under warranty and so i took chance and upgraded my platform to the new intel 10th gen.

So, i've bought the Asus Strix Z490-F Gaming, i've been buying this same inneration of their motherboards for some years now, and never had a single problem until this very problem i'm having with this one:

I, i installed everything, the PC turned on normally, formated windows, etc. The first weird thing i noticed is that on the Windows configuration it asked me to connect to the internet (wich always was), but i tought it was for the lack of drivers for a new chip or something, so i plugged in my wifi adapter and got internet.

After that first step, i got into windows, installed all the drivers, and i still wasn't able to get Ethernet connection, until i reseted the Internet Settings and powered off the PC completely and after boot everything was working (finally).

But now the real problem is: Ethernet stops working everytime i reboot my PC, if i totally turn it off it works normally after boot, but i just restart the PC i lose ethernet connection unless i cold boot it!!

Right now it's working because i turned off the PC, removed the power cord and plugged it back in, and it's working, but if i restart the PC i lose the connection, i check the cable connection behind the Motherboard even the lights of the connection are not working (unless, again, i cold boot it).

Could this be a problem on the Motherboard or something in BIOS?? I've tried multiple things to figure out the problem and can't find anything

P.S. Before you ask, the ethernet cable is working perfectly.

Best regards all.

TheLostSwede

Joined Nov 11, 2004 Messages 9,566 (1.54/day) Location Formosa

I would just RMA the board, as it seems like something is broken. Never seen Ethernet behaviour like that.

Also, before someone starts having a go at Realtek, this board has an Intel Ethernet controller.

bogmali

In Orbe Terrum Non Visi

Joined Mar 16, 2008 Messages 9,105 (1.82/day) Location Pacific Northwest

System Name	System Has No Name
Processor	Core i9-10920X
Motherboard	MSI X299 Pro Carbon
Cooling	Corsair H115i AIO
Memory	Adata 4x8GB DDR4-3200
Video Card(s)	Zotac AMP Holo RTX-3080ti
Storage	Samsung 960 Pro 1TB/860 EVO 512GB M.2 NVMe
Display(s)	Samsung UE510 UHD 28"
Case	Coolermaster MasterCase H500P
Audio Device(s)	AudioEngine D1 DAC/Onboard
Power Supply	Seasonic Prime Ultra 1K Watt
Mouse	Corsair Ironclaw RGB
Keyboard	Corsair K68 RGB
Software	Win10 Pro 64
Benchmark Scores	Xbox Live Gamertag=jondonken

I have a Gigabyte Aorus Z490 Pro AX and it does the same thing, disable and enable is what fixes it. You could also try manually loading IP address settings.

tabascosauz

Moderator

Joined Jun 24, 2015 Messages 3,545 (1.51/day) Location Western Canada

Processor	5900X
Motherboard	ROG X570 Impact (3601)
Memory	2x16GB 3800 15-15-15 1.42V
Video Card(s)	RTX 2060 Super FE (2010MHz @ 0.987V)
Case	Cerberus

Z490-F has a i225 NIC I think, the same 2.5Gbe Intel one that's been dropping to 1-10MB/s. ~~Since it's new, best option is just to take it back and try another one or try a different one.~~ i225 has a new stepping that's out now, but the boards that are available probably don't have the new one. Most of the Z490s and B550s have the same i225, so I don't know if this issue will just go away with a different board.

EDIT: ah here's what I'm looking for. Z490 Strix on reddit thread, solution is to go back to 1.0.0.13 driver. Then wait until Intel comes out with a patch. I must say, this i225 is singlehandedly undoing decades of Intel Gbe NIC superiority.

warriorunited

System Name	Silent, BUT DEADLY!
Processor	Intel i7 10700k @ 5.1 GHZ
Motherboard	Asus ROG STRIX Z490-F GAMING
Cooling	Noctua NH-U12S Chromax Black
Memory	G.SKILL Ripjaws V 32GB (4x8GB) DDR4 3200MHz
Video Card(s)	MSI GeForce® RTX 3080 GAMING X TRIO 10G
Storage	Samsung 970 EVO Plus 1TB M.2 NVMe + Samsung 970 EVO Plus 2TB M.2 NVMe
Display(s)	Asus ROG Swift PG279QE 27" IPS 165Hz G-Sync
Case	Fractal Define S + 1x Silent Wings 3 140MM PWM (back) + 2x Pure Wings 2 140MM (front)
Audio Device(s)	Onboard
Power Supply	EVGA SuperNova G2 850W
Mouse	Logitech G Pro Wireless
Keyboard	Corsair K70 MK.2 RGB Cherry MX Red

I don't know what to do, i know this motherboard is new but i already know how this store works: They will want to test out the motherboard, they are working at half people because of the pandemic, and i can't afford to be without PC right now, it would take ages for them to diagnose the problem

TheLostSwede

Joined Nov 11, 2004 Messages 9,566 (1.54/day) Location Formosa

That was reportedly fixed before any of the faulty chip shipped to consumers though.

warriorunited

System Name	Silent, BUT DEADLY!
Processor	Intel i7 10700k @ 5.1 GHZ
Motherboard	Asus ROG STRIX Z490-F GAMING
Cooling	Noctua NH-U12S Chromax Black
Memory	G.SKILL Ripjaws V 32GB (4x8GB) DDR4 3200MHz
Video Card(s)	MSI GeForce® RTX 3080 GAMING X TRIO 10G
Storage	Samsung 970 EVO Plus 1TB M.2 NVMe + Samsung 970 EVO Plus 2TB M.2 NVMe
Display(s)	Asus ROG Swift PG279QE 27" IPS 165Hz G-Sync
Case	Fractal Define S + 1x Silent Wings 3 140MM PWM (back) + 2x Pure Wings 2 140MM (front)
Audio Device(s)	Onboard
Power Supply	EVGA SuperNova G2 850W
Mouse	Logitech G Pro Wireless
Keyboard	Corsair K70 MK.2 RGB Cherry MX Red

Thanks a lot for your help!

Wich one is it? They are the same.

tabascosauz

Moderator

Joined Jun 24, 2015 Messages 3,545 (1.51/day) Location Western Canada

Processor	5900X
Motherboard	ROG X570 Impact (3601)
Memory	2x16GB 3800 15-15-15 1.42V
Video Card(s)	RTX 2060 Super FE (2010MHz @ 0.987V)
Case	Cerberus

I don't know. There is an article that claims the current stepping boards will continue to be affected in some way until Intel figures this out, or they're eventually replaced by the new SKUs.

OP, have you tried the drivers? The reddit thread is populated with users who have the exact same symptoms and are claiming the 1.0.0.13 driver fixes things. I'm guessing the older one, then.

Caring1

Joined Oct 22, 2014 Messages 12,716 (4.91/day) Location Sunshine Coast

System Name	Black Box
Processor	Intel Xeon E3-1260L v5
Motherboard	MSI E3 KRAIT Gaming v5
Cooling	Tt tower + 120mm Tt fan
Memory	Thermaltake Toughram 16GB 4400MHz DDR4
Video Card(s)	Asus GTX 970 Mini
Storage	Kingston A2000 512Gb NVME
Display(s)	AOC 24" Freesync 1m.s. 75Hz
Case	Corsair 450D High Air Flow.
Audio Device(s)	No need.
Power Supply	FSP Aurum 650W
Mouse	Yes
Keyboard	Of course
Software	W10 Pro 64 bit

That was reportedly fixed before any of the faulty chip shipped to consumers though.

I'm sure a thread on TPU states it required a hardware fix and that boards had already shipped.

TheLostSwede

Joined Nov 11, 2004 Messages 9,566 (1.54/day) Location Formosa

I don't know. There is an article that claims the current stepping boards will continue to be affected in some way until Intel figures this out, or they're eventually replaced by the new SKUs.

OP, have you tried the drivers? The reddit thread is populated with users who have the exact same symptoms and are claiming the 1.0.0.13 driver fixes things. I'm guessing the older one, then.

Well, the issue was that with some devices, it doesn't sync at 1Gbps, but forcing it to 100Mbps might be an option to try, as that should work.

I'm sure a thread on TPU states it required a hardware fix and that boards had already shipped.

Intels 2.5GbE-Controller hat einen Fehler – Neuauflage mit Rocket Lake-S in 2H 2020 - Hardwareluxx

Intels 2.5GbE-Controller hat einen Fehler – Neuauflage mit Rocket Lake-S in 2H 2020.

warriorunited

System Name	Silent, BUT DEADLY!
Processor	Intel i7 10700k @ 5.1 GHZ
Motherboard	Asus ROG STRIX Z490-F GAMING
Cooling	Noctua NH-U12S Chromax Black
Memory	G.SKILL Ripjaws V 32GB (4x8GB) DDR4 3200MHz
Video Card(s)	MSI GeForce® RTX 3080 GAMING X TRIO 10G
Storage	Samsung 970 EVO Plus 1TB M.2 NVMe + Samsung 970 EVO Plus 2TB M.2 NVMe
Display(s)	Asus ROG Swift PG279QE 27" IPS 165Hz G-Sync
Case	Fractal Define S + 1x Silent Wings 3 140MM PWM (back) + 2x Pure Wings 2 140MM (front)
Audio Device(s)	Onboard
Power Supply	EVGA SuperNova G2 850W
Mouse	Logitech G Pro Wireless
Keyboard	Corsair K70 MK.2 RGB Cherry MX Red

I don't know. There is an article that claims the current stepping boards will continue to be affected in some way until Intel figures this out, or they're eventually replaced by the new SKUs.

OP, have you tried the drivers? The reddit thread is populated with users who have the exact same symptoms and are claiming the 1.0.0.13 driver fixes things. I'm guessing the older one, then.

OMG, it actually works and fixed this!!

I downloaded the first of the list since there are two 1.0.0.13 drivers , and the problem is now gone! I can't believe they can brake up things like this because of a single driver. Everything seems to be working as it should be now.

Th3pwn3r

Joined Aug 6, 2009 Messages 1,162 (0.26/day) Location Chicago, Illinois I have an Asus z490-E Rog strix board and it also has this problem. I wasn't aware of it before buying and until yesterday since I just recently built the machine. I thought it was my Ethernet cable or switch so I tried another. The problem was still happening so I used the wifi to play some StarCraft II with the family yesterday I'll try flashing to the old driver and hopefully it works for me too.

New Member

Just got a brand new system with a i9 10900k and ASUS ROG Strix z490-e gaming and have run into the same no ethernet issue.

Here's what I've done:

When Windows finished installing, I installed Armoury Crate (ASUS update software) and installed all the drivers.

I didn't have any network so quickly found a bunch of forums with people talking about it and someone said to use 1.0.0.13 so I uninstalled the driver, rebooted and installed 1.0.0.13 and shutdown, pulled power cable out and then turned pc back on - no network

I then uninstalled the driver, restarted and then tried the firmware upgrade to v.1.45.

Ran install.bat as Administrator (it's in a folder by itself with the pdf) this is the entire output:

C:\I225V_End_User_FW_UPDATE\I225V_End_User\win64e>echo off
Bin file to update is: .\FXVL_15F3_ASUS.bin
.
Making sure QV driver is installed..
[uninstall.bat] Removing iQVW Driver - SUCCESS
Press any key to continue . . .
Welcome to the Tools driver installation program.
After installation of the driver (iqvsw64e.sys), the tool can be invoked.
-----------------------------------------------------------------------
Checking to see if iqvsw64e.sys exists on system
Installed version: 1.4.0.12
New version: 1.4.0.12
/y extension is enabled!
Copying iqvsw64e.sys file to C:\Windows\system32\drivers
1 file(s) copied.
Installing INF file
Microsoft PnP Utility

Processing inf : iqvsw64e.inf
Driver package added successfully.
Published name : oem45.inf

Total attempted: 1
Number successfully imported: 1

Installation done! You can now invoke the tool. To exit,
Press any key to continue . . .
.
Inventory of devices:
.

Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.35.28.1
Copyright (C) 2013 - 2020 Intel Corporation.

Inventory
[00:004:00:00]: Intel(R) Ethernet Controller (2) I225-V
Flash inventory started.
Shadow RAM inventory started.
Shadow RAM inventory finished.
Flash inventory finished.
[00:004:00:00]: Intel(R) Ethernet Controller (2) I225-V
Vendor : 8086
Device : 15F3
Subvendor : 1043
Subdevice : 87D2
Revision : 2
LAN MAC : D45D64573DB3
Alt MAC : D45D64573DB3
SAN MAC : 000000000000
ETrackId : 80000150
SerialNumber : 0000000000000000
NVM Version : 1.69(1.45)
PBA : G23456-000
VPD status : Not set
VPD size : 0
NVM update : No config file entry
checksum : Valid
.
.
. Updating.

Intel(R) Ethernet NVM Update Tool
NVMUpdate version 1.35.28.1
Copyright (C) 2013 - 2020 Intel Corporation.

Config file read.
Inventory
[00:004:00:00]: Intel(R) Ethernet Controller (2) I225-V
Flash inventory started.
Shadow RAM inventory started.
Warning: Probably incorrect image - LomBit is set and Pointer to OROM is VALID!
Warning: VPD module in the image is blank.
Shadow RAM verification started.
|>. [ 1%]. |
Difference found at offset 0x1E [Device=0x8203, Buffer=0x8200] - update required.
NVM update is required.
Shadow RAM verification finished.
Flash verification started.
|>. [ 0%]. |
Difference found in module Invalid at offset 0x3C - update required.
Flash verification finished.
Flash inventory finished.
Update
[00:004:00:00]: Intel(R) Ethernet Controller (2) I225-V
Flash update started.
|======================[100%]======================|
NVM verification started.
Shadow RAM verification started.
|======================[100%]======================|
Shadow RAM verification finished.
Flash verification started.
|======================[100%]======================|
Flash verification finished.
NVM verification finished.
Flash update successful.
Update security revisions
[00:004:00:00]: Intel(R) Ethernet Controller (2) I225-V
Skipping update minimum security revisions.
Checking update availability for next tool run.
The regular expression pattern .\FXVL_15F3_ASUS.bin is not valid.
At line:1 char:1
+ (gc config_i225.txt) -replace '.\FXVL_15F3_ASUS.bin','NVM_VERSION' | .
+

+ CategoryInfo : InvalidOperation: (.\FXVL_15F3_ASUS.bin:String) [], RuntimeException
+ FullyQualifiedErrorId : InvalidRegularExpression

Note: There is an error at the end

I turn the computer off, unplug the power wait for the lights on the motherboard to turn off then plug power back in and turn on. Then go to Device Manager > Intel Ethernet Controller 1225-V select update drivers and browse to DRV_LAN_Intel_I225_UWD_TP_W10_64_V1014_20200507R and include sub folders, install. It installs.

I turn the computer off, pull power out again, and turn back on. No ethernet.

Читайте также: