Isocusb driver что это

Обновлено: 06.01.2025

For those who bricked their phone and facing any of the following issue (Black screen, vibrating only, no fastboot, unable to start, unable to install firmware etc.)
If you got No Fastboot, No recovery, No Display, hard bricked your device.You must perform sequential steps indicated below, process will include many small steps. Plz make sure to perform all steps in same sequence and same manner as prescribed. Remove all drivers related to mobile you have installed earlier.

Step 1: Install the Intel Soc USB driver:

(if you are using windows 8 or 10. it is very important to disable driver signature enforcement. see the sections related to your windows below. (note: if you will reboot pc after disabling it will be enabled again)).

Step 1.1 - how to install these drivers:

(Note: if you see the image like below attached thumbnail and you click install software any way 2 times means drivers are installed correctly. if you don't see image below while installation it means you need to disable driver signature enforcement)

If you're using Windows 7:

Right-click the file - iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
Make The installation steps as usual until you see a small window "Windows Security" requires authentication settings then click on the "install this driver software anyway"

After This step, the driver installation is finished, continue to section 1.2 for connecting IntelSoc.

If you're using Windows 8 / 8.1 :

On Keyboard press Windows + I to show charm bar in the right corner,
click on the option setting. Choose "Change PC Settings" to enter the PC Settings.
Choose the General tab and navigate to Advanced Startup section, continue click Restart now.
This will reboot windows and allows you access to the advanced mode, now select the following options: Troubleshoot - -Startup Settings Advanced Options and then click the Restart button to restart the computer.

now you will see screen with various options numbered from 1. Find disable driver signature enforcement. And press the appropriate number on keyboard your pc will reboot

Now Right-click the file - iSocUSB-Driver-Setup-1.2.0 choose "Run as Administrator".
Make The installation steps as usual until you see a small window "Windows Security" requires authentication settings then click on the "install this driver software anyway"

After This step, the driver installation is finished, continue to section 1.2

If you're using Windows 10 :

On Keyboard press Windows + I or click Start, select Settings.
In The Settings window, select the Update & security.
Continue Choose recovery and then advanced startup and click "Restart now".
When The computer has access to the Advanced screen you will see screen with various options numbered from 1. Find disable driver signature enforcement. And press the appropriate number on keyboard your pc will reboot

After This step, the driver installation is finished, continue to section 1.2

1.2 Connect Zenfone with computer IntelSoc Mode:

Now you must complete this step before installing xfstk downloader. it helps to setup device's connection to PC

on your pc open device manager and find Intel Soc.
Click to expand it. You will see a single option under here.
Connect your phone to computer via USB cable,

now back to the phone, hold power button for 10 seconds to shutdown completely, then press simultaneously the key "power" + "volume down", until phone vibrates. Or computer makes detection sound, wait a few seconds. it will add an item immediately below intelSoC in device manager ?MOOREFIELD? new devices is connected successful.

( only after installing the above driver with correct steps and connecting Soc then only install xFSTK).

Step: 2 Installing xfstk-downloader:

( only after installing the above driver with correct steps) go ahead to unbrick process.

Unbrick Process:

After downloading the necessary files extract it. it will contain 3 files:- dnx_fwr.bin, ifwi.bin, droidboot_dnx.img.POS_sign.bin.

-Run XFSTK Downloader as Administrator, click the second tab at bottom MRD A0 / B0 + MOOR A0 + CRC .

-Then Go to Options to change the value in the Value Section Override Flag GP 0x80000807. Tick GP value over ride, change device detection time out value to 220 and Click OK is complete initial preparation. (important note: never use wrong gp flag value it may complicate things)

+ First select Firmware files FW DnX: and IFWI: by clicking small three dots:- IFWI DNX 2 dnx_fwr.bin and ifwi.bin file.
+ Now select operating system : skip the first box, in second box select file droidboot_dnx.img.POS_sign.bin

now switch off your mobile by holding power button for long and connect to pc.

now click begin download on xFSTK. after that simply power on mobile.

-Here You may see error multiple times just try to power off device completely and turn on again. flash again and again Until you see success: FW+OS Download complete!

After that you may see a 4 color screen, just like some TV stations stop broadcasting on TV. You have to wait a little. after few seconds or minutes device will boot into bootloader. wait 10 to 15 min if no success, If not repeat the xFSTK process again. once you get fastboot screen on device go ahead to flash RAW firmware

Now there are two ways to flash RAW firmware one is Asus Flash Tool (AFT) other is without AFT with help of commands. Personally, i like command method as it is much more reliable than Asus Flash Tool. both methods are provided here under.

Flash Raw Firmware Using Asus Flash Tool:

Download Asus Flash Tool and install. Run asus flash tool as administrator. And select the phone model. Then select the downloaded raw file and click start button to flash.
Note: sometimes flash process may go endless. If this happens remove the usb from computer. Kill asus flashtool process from task manager. Now run tool again and flash.

Flashing Firmware Without AFT:

For this you need two things first is adb tool and second is raw firmware file both links are provided here under:

Fastboot and adb tool: ( includes setup as well as independent files ) latest version updated

Adb fastboot tool for 64 bit windows and for those who are facing issue to load zip files while adb sideload. or unable to load system.img

Now very first of all, rename .raw firmware file to .zip file and extract all files from it.. now place all files in adb and fastboot folder. ( Note: to extract raw file to avoid extension issue please give firmware file a complete new name ie: "user.zip" or anything you like

now in folder ( where you placed files from raw firmware and adb and fastboot tool folder) at empty place anywhere in folder hold Shift on computer keyboard and right click with mouse. Now click open command window here.

perform the following commands

1. fastboot devices ( see if it is recognized: else plug out usb and plugin again)
2. fastboot oem erase_osip_header
3. fastboot oem start_partitioning
4. fastboot flash /tmp/partition.tbl partition.tbl
5. fastboot oem partition /tmp/partition.tbl
6. fastboot erase system
7. fastboot erase cache
8. fastboot erase data
9. fastboot erase APD
10. fastboot erase ADF
11. fastboot oem wipe splashscreen
12. fastboot oem stop_partitioning
13. fastboot flash splashscreen splash_sign.bin
14. fastboot flash token MFG_BOM_Full.bin
15. fastboot flash ifwi ifwi-prod.bin
16. fastboot flash boot boot_sign.bin
17. fastboot flash recovery recovery_sign.bin
18. fastboot flash fastboot droidboot_sign.bin
19. fastboot flash APD APD.img
20. fastboot flash system system.img
21. fastboot reboot

Phone will successfully reboot into system. don't worry, first boot gonna take a little longer time. so have patience and watch some funny video till phone boots up.

Now you can install any firmware version via adb sideload. make sure to install latest lollipop firmware before flashing Marshmallow. follow the guide to sideload.

How to Install firmware using adb sideload:

First of all go to setting > About >Software information > tap build number 7 times to enable developer options. now under setting go to developer options and find USB debugging here. tick to enable USB debugging

Now go to Asus website and download the desired firmware and place that file in adb fastboot tool folder. rename the files to your desirable short name ( lets take an example rename it to User.zip). now move your mouse cursor in folder anywhere at some empty place, press and hold the keyboard shift Button now right click your mouse button and open command window here. in cmd type adb devices and press enter ( note it will prompt an option on mobile to authorize the computer for adb. Please authorize this computer. ) after this your device will be listed under adb devices with some number. if not type command once again, if no success this time please ensure you have installed usb driver and authorized computer.
after adb recognize the device. run the following command

"adb reboot recovery"
phone will reboot into recovery ( Note you can go to recovery manually as well. for doing so power down your device. after that press and hold volume + button and press power button as mobile shows asus logo leave power button but keep holding volume button. you will boot into fastboot mode use your volume up and down key to go to option recovery mode. now click power button. phone will reboot into recovery mode.

once phone reboot into recovery mode find option apply update from adb and press that option with the help of power button

now go to cmd and run the following command

" adb sideload user.zip " ( Note: User.zip is the firmware file you download from asus and placed in adb tool folder and renamed so can be replaced with the name you renamed your file)

now let the computer do its work sit back and relax. once file loaded successfully reboot device.
( note first boot always takes little longer time so don't panic have patience and wait till phone boots completely

if you have any question please post here. use hide button while replying to avoid unnecessary length of post..

If the guide was helpful to you and your device is alive again. Hope you can hit the Thanks button. it will not take much effort or long time. Thank you.

Установка Драйвер расширяемого хост-контроллера Intel® USB 3.0 (версия 5.0.4.43v2) для семейство наборов микросхем Intel® серии 8/C220 и платформы процессоров Intel® Core™ серии U 4-го поколения.

Лицензия на использование программного обеспечения Intel

Для скачивания этого файла Intel требует принять лицензионное соглашение. Хотите пересмотреть свое решение? Скачивание файла начнется автоматически. если скачивание не начинается, скачайте его вручную

Файлы, доступные для скачивания

Файлы для скачивания intel(r)_usb_3.0_extensible_host_controller_driver_5.0.4.43_v2.zip

Windows 7, 32-bit*, Windows Server 2008 R2 family*, Windows 7, 64-bit*
Размер: 5.3 MB
SHA1: 5244B40174445A63781BCF00EDA8806CF1F2449F

Подробное описание

Примечание: Приложение Драйвер расширяемого хост-контроллера Intel® USB 3.0 не поддерживается в ОС Windows XP* и Windows Vista*.

Новая версия: 5.0.4.43v2.

Не знаете, подходит ли драйвер или программное обеспечение для вашего набора микросхем Intel®? Запустите Приложение Intel® Driver & Support Assistant (Intel® DSA) для автоматического обнаружения обновлений драйвера или программного обеспечения.

О Intel® software и драйверах

Драйвер или программное обеспечение для вашего компонента Intel® могли быть изменены или заменены производителем компьютера. Перед установкой нашего драйвера мы рекомендуем вам обратиться к производителю компьютера, чтобы вы не потеряли функции или настройки.

Этот скачиваемый файл подходит для нижеуказанных видов продукции.

Набор микросхем Intel® C236
Набор микросхем Intel® H170
Набор микросхем Intel® X99
Набор микросхем Intel® C232
Набор микросхем Intel® QM170 для мобильных ПК
Набор микросхем Intel® H97
Набор микросхем Intel® Q150
Набор микросхем Intel® HM86
Набор микросхем Intel® HM175 для мобильных ПК
Набор микросхем Intel® C224
Набор микросхем Intel® QM87
Набор микросхем Intel® Q85
Набор микросхем Intel® B150
Набор микросхем Intel® Q170
Набор микросхем Intel® Q87
Набор микросхем Intel® Z97
Набор микросхем Intel® Z87
Набор микросхем Intel® H110
Набор микросхем Intel® C612
Набор микросхем Intel® HM170 для мобильных ПК
Набор микросхем Intel® QM175 для мобильных ПК
Набор микросхем Intel® H87
Набор микросхем Intel® HM87
Набор микросхем Intel® Z170
Набор микросхем Intel® C222
Набор микросхем Intel® B85
Набор микросхем Intel® C226
Набор микросхем Intel® H81

Документация

Содержание данной страницы представляет собой сочетание выполненного человеком и компьютерного перевода оригинального содержания на английском языке. Данная информация предоставляется для вашего удобства и в ознакомительных целях и не должна расцениваться как исключительная, либо безошибочная. При обнаружении каких-либо противоречий между версией данной страницы на английском языке и переводом, версия на английском языке будет иметь приоритет и контроль. Посмотреть английскую версию этой страницы.

Для работы технологий Intel может потребоваться специальное оборудование, ПО или активация услуг. // Ни один продукт или компонент не может обеспечить абсолютную защиту. // Ваши расходы и результаты могут отличаться. // Производительность зависит от вида использования, конфигурации и других факторов. // См. наши юридические уведомления и отказ от ответственности. // Корпорация Intel выступает за соблюдение прав человека и избегает причастности к их нарушению. См. Глобальные принципы защиты прав человека в корпорации Intel. Продукция и программное обеспечение Intel предназначены только для использования в приложениях, которые не приводят или не способствуют нарушению всемирно признанных прав человека.

1.a)

Устанавливаем iSocUSB-Driver-Setup-1.2.0.exe iSocUSB-Driver, убеждаемся что в устройствах компьютера есть Intel SOC USB Driver.

Intel SOC USB Driver

1.b)

Устанавливаем IntelAndroidDrvSetup1.9.0.exe, убеждаемся что появилось устройство Android ADB Interface

Android ADB Interface

3.a)

3.b)

4.a)

Teclast DNX mode

4.b)

1.a)

Версия Win 8.1 with Bing взята у Onda w975. Пост тут. В нее были инсталированы все драйвера от нашего планшета.аншета.

Кстати удобный и качественные сборки делает MIREK с XDA!

Тест: прошивок на совместимость с HG9N:

X98 Air 3G (All variants) Android 5.0 mirek190_v2.0

X98 Air 3G (All variants) Android 5.0 beta v3.0 Mirek190

X98 Air 3G (C9J7) mirek190_v3.1

X98 Air 3G (C8J7) mirek190_v3.1

X98 Air 3G (C8J7)-Android4.4.4-V2.05

X98 Air 3G (C6J6) mirek190_v3.0

X98 Air 3G (C6J6) v4

X98 Air 3G (C6J6) v 4.4.4 light rom

X98 Air 3G (C6J6)-Android4.4.4-V2.01

X98 Air II (HG6M) light v4

X98 Air II (HG9M)_Android5.0-1

X98 Air II (HG7N)-Android4.4.4-V1.02_elvisi-EN

Teclast X98 Air 3G (C5J6)_android 5.0_trial version

Airclast X98 slim

X98 Airclast Slim Android 5 Lolipop custom rom

установка ок, камеры не пашут.

после установки сразу ребут.. камеры не пашут.

установка ОК, камеры не пашут

установка ОК, камеры не пашут.

установка ОК, v4.4.4. камера ОК. CH

установка ОК -камера ОК. RU

установка ОК, v4.4.4, камера перевернута.

установка ОК, камера перевернута.

установка ОК, все работает, камера перевернута.

If you are able to enter into fastboot then this process is not applicable for your case. please don't use this method.

Battery is charged or not
Are you pressing right button ??
Recheck the time to release power button

Requirements : Windows 7 pc/laptop (drivers tested on this devices)

instruction : install above driver as per ranking. follow these instruction while installing:
1. Right click on setup
2. Select run as administrator
Note : while installing isoc drive system may ask you to connect your device or restart your device. Don't skip
those steps or it will result into driver not working case. Please allow all things asked by your pc .

Driver Checkpoint: 1. connect your device
2. Wait for windows to install driver automatic . Below picture will pop up

3. Right click on my computer , select "properties ". Go to "device manager". select "intel
soc"
3. when your phone is turned on a USB patterns and connected to the computer there
should be two new devices, are classified under Intel Soc: CloverviewPlus Device and
Intel Soc USB Driver . Picture :

If both are not showing in soc section try restating your computer . Check again still no improvement then :

install above driver as per "instruction "

Necessary Condition for working of tool : Driver Checkpoint condition must be met

Step 1.1 Download folder as per your model given : zenfone 4 / zenfone 5 / zenfone 6
Check Folder contains these files : dnx.bin , ifwi.bin , dnx_osr.bin , fastboot-2.19.img.pos.bin
Put all files into single folder .

Step 1.2
Confirm the phone has been connected to the computer, which also appeared Device Manager device described above,open xFSTK DOWNLOADER
After opening note beneath the tabs to switch to the rearmost CLVP A0 / B0 / B1

Confirm the Device status field which shows Scanning: CLOVERVIEWPLUS TARGETS DETECTED: 1, if the last place is displayed as 0, make sure that the Device Manager inside It has detected devices.

Step 1.3:
Give proper path to corresponding section :

Fw Dnx : dnx.bin
IFWI : ifwi.bin
OS dnx : dnx_osr.bin
OS image : fastboot.xx.imp.pos.bin

Then press begin download

After the completion of the phone will automatically reboot if the boot screen becomes Intel inside patterns means you have reached your destination .
Now you can enter into fastboot/booloader/drodboot.There are so many methods given to unbrick, soft bricked phone

Advice: USe Adb method to recover your phone.

Problems detected :

Encountering " Windriver Error: 0x20000015 "

Expected cause : Driver not installed correctly .

Method :
1. uninstall xfstk downloader
2.restart computer
3. right click on xfstk downloader and select option run as administrator .
4. install first then open xftsk as admistrator
5. give path to those files on xftsk as per instruction
6. Press the Start Download button in XFSTK
7. Then connect usb and press power + volume up button .
Still encountering :

Method :
1. open Device Manager (from Windows command prompt, type devmgmt.msc)
2. Find the device (it probably is under Android Devices.)
3. RIght click on the device, choose "Update Driver" and then "Browse My Computer. " and then "Let me
pick from a list of device drivers on my computer."
4. You might have to unclick "Show Compatible Hardware"
5. In the Manufacturer section, pick Google or Intel.
6. Under Model, pick "Android Bootloader Interface."
7. Click Next, and then Ok to Ignore scary warnings.
8. Start xftsk download-er do the required thing

Sorry for my bad English .

Thnaks
Rishav754

rishav754

Senior Member

2. It then still gave me an error but I forgot what it was, I didn't save the logs until much later. Scouring the thread someone suggests providing a soft fuse file. Okay. I downloaded the file from him BUT xfstk gives me error code 45 softfuses signature error. I had to download the raw firmware from here to get the soft fuse file to get it to work.

THIS FORUM IS DEAD , KINDLY USE OTHER METHODS
THANK YOU

bajong

Senior Member

LuBu161

Member

mcpterra

Senior Member

Hello, good evening.
I tried in a Zenfone 6 but it fails.
Saying: softfuse missing, please insert softfuse. and then softfuses signature error code 45

Please can you help me ?

---------- Post added at 04:58 AM ---------- Previous post was at 04:53 AM ----------

That is the error.
Can you help me?
04:54:49 - XFSTK-STATUS--USBSN:39FD7A5E068590C4--Softfuses Binary absent. Please provide binary.
04:54:49 - XFSTK-LOG--USBSN:39FD7A5E068590C4--GetOpCode
04:54:49 - XFSTK-LOG--USBSN:39FD7A5E068590C4--ReadInAck
04:54:49 - XFSTK-LOG--USBSN:39FD7A5E068590C4--GetAck
04:54:49 - XFSTK-LOG--USBSN:39FD7A5E068590C4--GetAck - HLT0(0x4)
04:54:49 - XFSTK-LOG--USBSN:39FD7A5E068590C4--Softfuse Binary file size = 0 or Number of keys = 0
04:54:49 - XFSTK-LOG--USBSN:39FD7A5E068590C4--void CloverviewPlusDownloader::do_abort()
04:54:49 - XFSTK-LOG--USBSN:39FD7A5E068590C4--Abort
04:54:49 - XFSTK-STATUS--USBSN:39FD7A5E068590C4--FAIL
04:54:49 - XFSTK-STATUS--USBSN:39FD7A5E068590C4--Errors encounter during FW download. Aborting .
04:54:49 - XFSTK-LOG--USBSN:39FD7A5E068590C4--virtual bool CloverviewPlusDownloader::GetStatus()

Читайте также: