3d model lego duplo

Обновлено: 07.01.2025

Easy to print, tought and compact construction. . Without supports. Not compatibile with classic lego blocks: bottom is flat. . Printed with horizontal compensation: -0.15mm (without this setting it also suit, but very tight).

LEGO Duplo train track: straight (half size)

. construction. . Without supports. Not compatibile with classic lego blocks: bottom is flat. Printed with horizontal compensation: -0.15mm (without this setting it also suit, but very tight). This track is useful with 90° crossing. . See picture.

. tought and compact construction. . Unfortunately - it needs supports. But easy to remove. Not compatibile with classic lego blocks: bottom is flat. . Printed with horizontal compensation: -0.15mm (without this setting it also suit, but very tight).

LEGO Duplo train track: straight (full size)

Not compatibile with classic lego blocks: bottom is flat. Printed with horizontal compensation: -0.15mm (without this setting it also suit, but very tight). . You may also need straight half size tract to fully use this crossing (see picture; you.

Works still fine as there is no need for the "flying" hook as long you dont "click" the track on top of other DUPLO parts: The DUPLO Tracks are cut out down to bottom and some new original DUPLO Tracks are designed the same. Awesome design.

Not fully compatibile with classic lego blocks: bottom is flat except ends - there are holes to connect tract to standatd block. It allows to make long bridges (see photo). Printed with horizontal compensation: -0.15mm. . (without this setting it not.

As Im not satisfied with other designs, i had to create my own

This is a remix. . 25CM tall, and it can holds 20 tracks on each side, 40 tracks total. . added a base, so it is stable

Lego Duplo Train 35. Degree Track

I wanted to put more directions for my Sons lego Duplo Track. So i made it go up. . If Something isn´t right, PM me, and i can adapt it.

The duplo and lego interfaces on these parts are not exactly to specification due to some dimensional differences when printed. I found these value experimentally, but they may not be ideal if you're using a different printer. Some assembly.

Lego Duplo track crossing with wooden train. Compatible with Brio. Lego Duplo Zugschienenkreuzung mit Holzzugschienen. Kompatibel mit Brio. No support required for printing. . This is a remix of "LEGO DUPLO track straight supportless (long.

. manufactured and fully tested in-house. . They snap perfectly both to each other and to original Lego DUPLO tracks. . The ones I found on Thingiverse seemed to be made in haste - so I took the time to create a crossing that looks and works better.

Noticed that the Car for Magic tracks also runs on the Lego Duplo Train Tracks, so wanted to combine those. . And it works.

A cross track compatible with Lego Duplo train tracks. Designed for easy printing without supports. I have also attached my SketchUp file with both designs if someone wants to remix. If you print one, please share your make. Thanks! Two version.

Conect Lego Duplo

conect Lego Duplo

Lego Duplo railroad tracks

lego duplo train wheel

Lego Duplo 3er Weiche

Lego Duplo repair

Simple organizer for LEGO Duplo trains

My design of lego duplo 2x2 brick

Knife compatible with Lego Duplo characters

Ersatzteil für ein Lego Duplo Flugzeug

This is high detailed model of Lego DUPLO 2x2 brick.

Lego Duplo cars coupler

Lego Duplo Fitting Flat

Lego Duplo flat Fitting to create tangibles to code or other gamification pieces.

Hi. . i share my designe door for Lego Duplo. Works perfect. ***Check my other designes*** Enjoy! .

ladder height 12 levels of lego duplo and 11 levels.ladder without handrails for easest printing. .

Lego duplo snow plow

A parametric snow plow and scoop compatible with lego duplo excavator.

Lego DUPLO Dusche 4x2x1

Lego Duplo Dusche mit 4x2 Grundsokel. . Bestehend aus zwei Teilen zum drucken ohne Support.

Lego Duplo simple rails

Simple rails for Lego Duplo. . They are printed without support, they maintain the passage of the bicycle. Suitable for installation of sensors. Update. Improved Lego_Duplo_Track_Kurved file, new version 2 uploaded.

Lego Duplo compatible forks to e.g. . swap with the bucket of the Lego Duplo Backhoe 10811. . Update: New stl files with slightly tighter fit for the rotational connector and correct print orientation.

This is the version with a flat bed, long size (equivalent to 10x4 studs, 160mm) of the Lego Duplo wagon series. Addition of 10 bars on the side. . see lego duplo wagon long 10x4 for instructions.

LEGO DUPLO Rampen

Ein paar Auffahrrampen für LEGO DUPLO. . Dazu noch eine flache Lochplatte mit der zwei Basisplatten verbunden werden können.

Lego Duplo Canon Spiderweb

My son has a thing with Spiderman, so I made him this spiderweb projectile for his Lego Duplo canon, so now he can shoot spiderwebs :)

LEGO Duplo things

Another LEGO Duplo parts. I'm trying to design all my products to be easy printable without support. . Antiwarp version of stl should be helpful.

Lego Duplo Sink Big Size 8x4 Brick Size Print in 2 Processes Bottom Process with no Support für de Duplo fitting 2. . Process with Support and Infill Layer Height: 0.2mm Infill: 25%

ladder height 12 levels of lego duplo and 11 levels. ladder without handrails for easest printing. . I recommend turn ladder by 121.218393 degrees to x axis before printing.

ladder height 12 levels of lego duplo and 11 levels. ladder without handrails for easest printing. Print instructionsI recommend turn ladder by 121.218393 degrees to x axis before printing.

A snowplow for Lego duplo, designed with durability and printability in mind. . Requires only minimal support above the connector, and should hopefully survive the (ab)use of a three-year old :)

Action Bricks for new Lego Duplo train system. Each color of a brick corresponds to the action. . To the desired action, use a specific color plastic: Yellow - beep (horn) White - on/off light Blue - wash Red - stop Green - reverse